Search

DGG Wall-solid Interface Agent

DGG Wall-solid Interface Agent

DGG wall-solid interface agent is a polymer emulsion synthetic colloid, which does not contain any harmful substances and mainly enhances the penetration of the base layer. It is suitable for infiltration strengthening of concrete surface, masonry base, gypsum board, cement fiber board, peeling......

Send InquiryChat Now

DGG wall-solid interface agent is a polymer emulsion synthetic colloid, which does not contain any harmful substances and mainly enhances the penetration of the base layer. It is suitable for infiltration strengthening of concrete surface, masonry base, gypsum board, cement fiber board, peeling aging wall and trimed putty wall . It is a high-grade base treatment agent before the construction of putty or plaster layer. DGG wall-solid interface agent  can improve the adhesion of the smooth surface of the substrate, control the water absorption of the base layer, and ensure the subsequent construction workability and adhesion to prevent it from cracking, falling off, and mildew. This product has a particularly obvious effect on the penetration enhancement after the original putty layer is removed, replacing the past construction glue (801)

Product features:

1. Formaldehyde-free and environmentally friendly,

2. Easy to apply and quick-drying

3. Moisture and mildew resistant

4.  Strong penetration

Usage and dosage:

1.Be sure to keep the base layer with a certain strength before painting, clean and dry, especially the old wall surface, remove the powder layer in advance, remove the peeling off parts, remove the grease wax, and handle the mildew.In theory, 1kg wall solid can be coated 10m2 once.Actual consumption varies depending on the base layer

2. Water consumption for loose base (especially first layer), wall solid: water = 1: 2 ,roll three times (sequential penetration)

3. Water consumption for common base ,wall solid:water=1 :1,bush twice.

4. No need water for post-roughened concrete base ,wall solid:cement dry powder=1 :2,adopt brushing or bullet coating technology.

Precaustion:

1.After first layer get dried, apply a second layer (to prevent attaching the first layer). 

2. It is forbidden to use on non-absorbent materials such as metals, plastics, etc. 

3. Pay attentionto the frosty weather and adopt necessary protective measure.

Packing specification: 18kg / barrel


Technical standards: JC/T 907-2002:

Environmental protection standard: GB 18583-2008



Hot Tags: dgg wall-solid interface agent, China, suppliers, manufacturers, cheap, made in China
Related Products
Copyright © Zhejiang Taizheng Construction Material Co.,Ltd All Rights Reserved.