Search

Interface Agent

DGG interface agent This is an interface agent specially designed for self-leveling cement. It is polymer emulsion used for pre-construction treatment of the base surface and improve its physical properties.It can seal the bottom, reduce the absorption of the base layer, and enhance the......

Send InquiryChat Now

DGG interface agent

This is an interface agent specially designed for self-leveling cement. It is polymer emulsion used for pre-construction treatment of the base surface and improve its physical properties.It can seal the bottom, reduce the absorption of the base layer, and enhance the interfacial adhesion of new and old inorganic non-metallic materials. It has the characters of Convenient construction, non-toxic, odorless, transparent, formaldehyde free and  zero VOC emissions.


interface-agent16345145848interface-agent18177148797

 

Application of interface agent in the floor

Applicable base:

DGG101 is used for the primer coating of the absorbent base ground such as concrete, cement mortar and anhydrite base layer.

In this way can close the base of the capillary and gap, reduce the absorption of the porous base layer and enhance the interfacial adhesion of the base layer, acting as a bonding bridge. The base layer after the primer coating can be used for the construction of the self-leveling process.

 

Base processing:

The base layer should be hard, smooth, dry, clean, free of cracks, no grease, no release agent and other chemical additives. If the surface of the base layer is loose or has large-area floating slurry phenomenon , it is advisable to shot peening or use a floor hardener to increase the strength of the base layer. Sand the base layer before primer and clean it with a vacuum cleaner.

 

Construction method:

1.Directly use a wool roller to fully roll the base layer and high-absorbency base layer must be rolled twice.

2.The interface treatment of both cement mortar floor and concrete floor is not required to be watered.

3.Tools and containers can be washed with water.

 

Precautions:

This interface agent is only suitable for use at temperatures between 5 °C and 35 ° C. The data in the manual is obtained under the  temperature of  +23 °C ± 2 °C and  relative humidity of 50-55%.  Please note that the curing time will be extended or shortened according to the relative condition.

 

Packaging and storage:

Packed in 18kg plastic drum.

This product must be stored indoors at 5 °C -35 °C to prevent freezing and exposure. The shelf life is 12 months.


Hot Tags: interface agent, China, suppliers, manufacturers, cheap, made in China
Related Products
Copyright © Zhejiang Taizheng Construction Material Co.,Ltd All Rights Reserved.